Management
2 Ch amplifier to a couple of Aliseo loudspeakers (passive crossover provided, for each Aliseo). If very high output is needed we recommend to use a DSP: High-pass filter @50Hz, 12 dB/oct. or higher slope. Otherwise as Satellite with subwoofer: Amplifier+DSP to match to subwoofer. High-pass filter @90Hz, 12 dB/oct. or higher slope. Inner thermal protection device provided, to avoid overdrive.
Suggested amplifier
2 channel amplifier, around 450W on each channel @ 4 ohm stable
Aliseo
Management
2 Ch amplifier to a couple of Altano (stereo)+DSP to match to satellite. High-pass filter @30Hz, 24 dB/oct.But; Low- pass filter @100- 120Hz, 24 dB/oct. LR.
Suggested amplifier
2700W @ 2 Ohm with amplifier @ 2 Ohm stable.
Altano
Borea Sub
Management
2 Ch amplifer to a couple of Borea (stereo)+DSP to match to satellite. High-pass filter @30Hz, 24 dB/oct.But or higher slope ;Low- pass flter @100-120Hz, 24 dB/oct. LR.
Suggested amplifier
900 W @ 8 Ohm.
Cerberus
Management
2 Ch amplifier to a couple of Cerberus+DSP to match to satellite. Otherwise 3 ch amplifier to one Cerberus, each 18” driven individually. High-pass filter @25Hz, 24 dB/oct. But or higher slope; Low-pass filter @100-120Hz, 24 dB/oct. LR.
Suggested amplifier
Around 10000W @ 2 Ohm stable.
Hydra
Management
2 Ch amplifier to a couple of Hydra+DSP to match to satellite. High-pass filter @25Hz, 24 dB/oct. But or higher slope ;Low-pass filter @100-120Hz, 24 dB/oct. LR.
Suggested amplifier
3400 W @ 4ohm with amplifier @ 2 Ohm stable.
Management
2 Ch amplifier to a couple of Kona loudspeakers (inner passive crossover provided, for each Kona)+DSP to match to subwoofer. High-pass filter @100Hz, 24 dB/oct. LR.
Suggested amplifier
1000 W @ 4 Ohm with amplifier @ 2 Ohm stable.
Kona Storm
discontinued
Management
2 Ch amplifer to a couple of Kona loudspeakers (inner passive crossover provided, for each Kona Supra) + DSP to match to subwoofer. High-pass filter @100Hz, 24 dB/oct. LR. The setting of safety DSP devices with a limiter function is recommended.
Suggested amplifier
1000W @ 4 Ohm with amplifier @ 2 ohm stable.
Kona Supra
Management
2 Ch amplifier to a couple of Ostro loudspeakers (inner passive crossover provided, for each Ostro) .If very high output is needed we recommend to use a DSP : High-pass filter @50Hz, 12 dB/oct. or higher slope . Otherwise as Satellite with subwoofer : Amplifier+DSP to match to subwoofer. High-pass filter @90Hz, 12 dB/oct. or higher slope.
Suggested amplifier
500W @ 4 Ohm with amplifier @ 2 Ohm stable.
Ostro
Management
2 Ch amplifier to a couple of Ovoid18 (stereo)+DSP to match to satellite. High-pass filter @25Hz, 24 dB/oct. But or higher slope ;Low-pass filter @100-120Hz, 24 dB/oct. LR.
Suggested amplifier
3400 W @ 4ohm with amplifier @ 2 Ohm stable.
Ovoid Sub 18”
Management
2 Ch amplifier to a couple of Ovoid15 (stereo)+DSP to match to satellite. High-pass filter @30Hz, 24 dB/oct. But or higher slope ;Low-pass filter @100-120Hz, 24 dB/oct. LR.
Suggested amplifier
2000 W @ 4ohm with amplifier @ 2 Ohm stable.
Ovoid Sub 15”
Management
2 Ch amplifier to a couple of Polyphemus loudspeakers (inner passive crossover provided, in each Polyphemus)+DSP to match to subwoofer. High-pass filter @ 120Hz, 24 dB/oct LR.
Suggested amplifier
800 W @ 4 Ohm
Polyphemus
Management
2 Ch amplifier to a couple of SWave loudspeakers (outer passive crossover provided, for each SWave)+DSP to match to subwoofer. High-pass filter @130Hz, 24 dB/oct. LR.
Suggested amplifier
700 W @ 4 Ohm
Shockwave
discontinued
Management
4 Ch amplifier to a couple of Twister loudspeakers (outer passive crossover provided, for each Twister horn loaded mid+hf)+DSP. Horn loaded mid+hf :High-pass filter @400Hz, 24 dB/oct. LR; Relative Gain -12dB,Delay 0 ms 15”: High-pass filter @40Hz, 24 dB/oct.But or higher slope, Low pass filter @400Hz, 24 dB/oct. LR.
If subwoofer is needed: Horn loaded mid+hf : as above 15”: High-pass filter @100Hz, 24 dB/oct LR, Low pass filter @400Hz, 24 dB/oct. LR.
Suggested amplifier
400 W @ 4 Ohm for mid high frequencies
2000 W @ 8 Ohm for low frequencies
Twister
discontinued
Management
2 Ch amplifier to a couple of Zephyrus loudspeakers (passive crossover provided, for each Zephyrus) . If very high output is needed we recommend to use a DSP : High-pass filter @70Hz, 12 dB/oct. or higher slope. Otherwise as Satellite with subwoofer: Amplifier+DSP to match to subwoofer. High-pass filter @90Hz, 12 dB/oct. or higher slope.
Suggested amplifier
2 channel amplifier, around 350W on each channel @ 4 Ohm stable